مكعب جرانيت عالي الدقة لاكتشاف الدوران والمحاذاة
عجائب اللحامون يصوغون التميز معًا
مكعب جرانيت عالي الدقة لاكتشاف الدوران والمحاذاة
| السمات الرئيسية | |||
| الدقة | الصف 0، الصف 00، الصف 000 | مكان المنشأ | شاندونغ، الصين |
| اسم العلامة التجارية | جينتيلاي | رقم الموديل | مخصص |
| اسم المنتج | منصة الجرانيت الدقيقة | ضمان المواد الجرانيت الجرانيت | 1 سنة |
| الوظيفة | القياس، والفحص، والمعايرة، ومراقبة الجودة | دعم مخصص حسب الطلب | تصنيع المعدات الأصلية وتصنيع المعدات الأصلية |
| المواد | جرانيت خام | الميزات | صلابة عالية، مقاومة للتآكل |
| اسم المنتج | منصة الجرانيت الدقيقة | الحزمة | صندوق خشبي |
| موك | 1 قطعة | الحجم | مخصص |
| التطبيق | الأوتوماتيكية الصناعية | الشحن | البحر |
| نقاط البيع الرئيسية | تكلفة صيانة منخفضة | ||
المقارنة بين مواد الجرانيت
| المحتوى | جنان بلاك | أسود هندي | سمسم أسود 654 |
| الجاذبية النوعية | 3100-3300 كجم/م3 | 3200-3300 كجم/م3 | 2900-3000 كجم/م3 |
| معامل المرونة | 1.27 × 105 نيوتن/مم2 | 1.29 × 105 نيوتن/مم2 | 1.27 × 105 نيوتن/مم2 |
| معامل التمدد الخطي | 4.61×10 -6/℃ | 4.61×10 -6/℃ | 4.61×10 -6/C |
| معامل التمدد الحراري | 0.18%/C | 0.18%/ درجة مئوية | 0.2%/C |
| امتصاص الماء | <0.013% | <0.011% | <0.013% |
| صلابة روكويل | >70.9 | >70.9 | >70.9 |
| المكافئ الإشعاعي | 0.38 وحدة سيفرت/ساعة | 0.35 وحدة سيفرت/ساعة | 0.38 وحدة سيفرت/ساعة |
| قوة الانضغاط الجاف | 220.1 ميجا باسكال | 221.1 ميجا باسكال | 218.3 ميجا باسكال |
| المظهر | بقع بيضاء موزعة بالتساوي مثل رقاقات الثلج (تبدو شفافة)، بمظهر نظيف ولامع بعد الصيانة. | بقع بيضاء موزعة بالتساوي مثل رقاقات الثلج، مع مادة سوداء ولامعة القاعدة. بعد الصيانة، يكون المظهر نظيفة ولامعة. | هناك نقوش بيضاء موزعة بالتساوي (غير شفافة)، أكبر في النمط مقارنةً بجينان بلاك. المظهر نظيف ولكنه أقل لمعاناً من جينانالأسود. |
| الاحتفاظ الدقيق | أقل من 5 ميكرومتر (أم) | أقل من 5 ميكرومتر (أم) | 5-10 ميكرومتر |
| سهولة المعالجة | سهولة | صعب | أصعب |
| وبسبب سياسات الصين البيئية، توقف تعدين الجرانيت الأسود في جينان منذ عام 2006. بعد 15 عامًا، تم استخراج أصبحت كتل الجرانيت الأسود من جينان نادرة ولم يعد من الممكن الحصول عليها إلا بقطع قليلة، ولم يعد من الممكن الحصول عليها في كميات كبيرة. | |||
- +86-19963821514
- +86-19963824131
- +86-13287790581
- jintelai@jtlcnc.com
تفاصيل المنتجات
منصة أدوات دقيقة من الجرانيت، مصنوعة من مادة حجر “جينان بلو” عالية الجودة من خلال المعالجة الميكانيكية والطحن اليدوي. عالية ، لا تشوه ، استقرار جيد ، عمر خدمة طويل ، مناسبة لأعمال القياس في المصانع الميكانيكية والمختبرات.
يتكون التركيب المعدني الرئيسي لجرانيت “جينان الأزرق” من الهورنيند والبلاجيوكلاز والبيوتيت وكمية صغيرة من المغنتيت بلون أسود وبنية دقيقة وبعد مليارات السنين من التقادم والتوحيد والاستقرار الجيد والقوة العالية والصلابة العالية، والتي يمكن أن تحافظ على دقة عالية تحت الحمل الثقيل.
المزايا:
- دقة عالية، وثبات جيد، وليس من السهل تشويهه، مما يضمن دقة القياس في درجة حرارة الغرفة.
- لا يصدأ، ومقاوم للأحماض والقلويات، ولا يحتاج إلى صيانة خاصة.
- مقاومة التآكل وعمر خدمة طويل.
- لا تؤثر الخدوش والنتوءات على سطح العمل على دقة القياس.
- لا توجد مشكلة مغنطة.
. يمكن أن تنزلق بسلاسة دون أي شعور بالسحب أثناء القياس.
يتم الرجوع إلى دقة الصفيحة المسطحة من الجرانيت إلى مختلف المعايير الوطنية المتقدمة، ويستند تفاوت التسطيح: معيار JB/T7975-1999: الدرجة 000 = 1 × (1 د/1000) أم؛ الدرجة 00 = 2 × (1 د/1000) أم؛ الدرجة 0 = 4 × (1 د/1000)؛ الدرجة 1 = 8 × (1 د/1000) أم (د هي المليمتر القطري) (درجة حرارة القياس عمومًا 20 ± ℃).
大理石平板规格、重量及精度
| 规 格 长 ××宽×厚 | 重ִקּק | 000 ℃ 精 μم | 00ــ Μ | 0 ℃ 精 μم | 1ـــ Μ |
| 300×300×50 | 19 | 1.5 | 3 | 6 | 12 |
| 400×300×70 | 25 | 1.5 | 3 | 6 | 12 |
| 400×400×70 | 48 | 2 | 3.5 | 6.5 | 13 |
| 630×400×100 | 76 | 2 | 3.5 | 7 | 14 |
| 630×630×100 | 155 | 2 | 4 | 8 | 16 |
| 800×600×100 | 156 | 2 | 4 | 8 | 16 |
| 1000×630×130 | 284 | 2.5 | 4.5 | 9 | 18 |
| 1000×750×150 | 338 | 2.5 | 5 | 9 | 18 |
| 1000×1000×150 | 450 | 2.5 | 5 | 10 | 20 |
| 1600×100×0200 | 963 | 3 | 6 | 12 | 24 |
| 2000×1000×200 | 1200 | 3.5 | 6.5 | 13 | 26 |
| 1600×1600×300 | 2312 | 3.5 | 6.5 | 13 | 26 |
| 2000×1600×300 | 2890 | 3.5 | 7 | 14 | 28 |
| 2500×1600×300 | 3612 | 4 | 8 | 16 | 32 |
| 3000×2000×500 | 9030 | 4.5 | 9 | 18 | 36 |
| 4000×2000×500 | 12040 | 5.5 | 11 | 22 | 44 |
| 6000×2000×700 | 25284 | 7.5 | 15 | 30 | 60 |
FAQ
1. What is the maximum size of granite workbench that can be processed??
Normally, we have two types of granite platforms: regular granite platforms (usually available in stock) and customized granite platforms (customized according to customer needs, with delivery time). However, the maximum size that can be processed is one piece (no splicing, preferred for high-precision grade 00/000) and multiple piece splicing (extra large size, mostly used for grade 0 ordinary reference tables/equipment bases).
1. Our factory can achieve 4000mm × 2000mm × 700mm in a single piece (without splicing, with high-precision platforms of grade 00 and 000), with a conventional platform thickness of 150-400mm; heavy-duty bases can achieve 600-800mm;.
2. Multi piece splicing platform (can be made larger, mainly level 0, suitable for large equipment bases) Our factory can achieve 8000mm × 4000mm × 600mm (splicing short board: the accuracy at the splicing joint is slightly poor, and there is a slight risk of misalignment between the boards under long-term temperature and humidity cycles. High precision measurement should avoid splicing as much as possible).
3. Selection reference suggestions.
✅ Level 000/Level 00 Metrology Inspection Platform: Priority given to integrated whole piece, recommended ≤ 3000 × 2000mm.
✅ Level 0 large-scale assembly and equipment base: splicing solutions can be selected to achieve a size of 6 meters or even larger.
✅ Thickness selection: The larger the length and width, the thicker the height (thickness) must be to prevent deflection and deformation of the tabletop, for example, 3000 × 2000, starting from a conventional thickness of 500mm
1. Our factory can achieve 4000mm × 2000mm × 700mm in a single piece (without splicing, with high-precision platforms of grade 00 and 000), with a conventional platform thickness of 150-400mm; heavy-duty bases can achieve 600-800mm;.
2. Multi piece splicing platform (can be made larger, mainly level 0, suitable for large equipment bases) Our factory can achieve 8000mm × 4000mm × 600mm (splicing short board: the accuracy at the splicing joint is slightly poor, and there is a slight risk of misalignment between the boards under long-term temperature and humidity cycles. High precision measurement should avoid splicing as much as possible).
3. Selection reference suggestions.
✅ Level 000/Level 00 Metrology Inspection Platform: Priority given to integrated whole piece, recommended ≤ 3000 × 2000mm.
✅ Level 0 large-scale assembly and equipment base: splicing solutions can be selected to achieve a size of 6 meters or even larger.
✅ Thickness selection: The larger the length and width, the thicker the height (thickness) must be to prevent deflection and deformation of the tabletop, for example, 3000 × 2000, starting from a conventional thickness of 500mm
2. How many micrometers can the flatness reach? Can the accuracy be achieved at level 00, level 0, or level 000? What are the levels of 000/00/0?
Our factory achieves different levels of precision for different sizes. The small-sized integrated platform (≤ 1500 × 1000mm) can be used for all levels of 000/00/0, and can be ground and tested in a constant temperature and humidity workshop. Medium to large-sized integrated whole piece (1500 × 1000~3000 × 2000mm), capable of stable operation at level 00 and 0; Customization is possible at level 000, but the difficulty is high, requiring long-term constant temperature aging, ultra precision grinding, and shock-absorbing foundation;
3. Should we use Jinan green or other granite?
The commonly used stone materials in our factory are Jinan Qing, Indian, Zhangqiu, and Northeast materials. Jinan Qing is the benchmark substrate for precision granite platforms in China, and is the preferred choice for Class 000/00 high-precision; At the same time, other granite materials such as Indian black and Zhangqiu black can be selected according to the customer's budget and usage.
1. Physical parameters of Jinan Qingxin: density of 3.07~3.3 g/cm ³; Water absorption rate<0.13%; Linear expansion coefficient 4.16 × 10 ⁻⁶/℃; Mohs hardness level 6-7;
Advantages: ultrafine grain size, uniform and dense structure, low internal stress, good shock absorption and damping, minimal temperature and humidity deformation, stable up to levels 000, 00, and 0; Not dyed, permanently colorfast; Resistant to cutting fluid, non-magnetic, suitable for three coordinate, optical, and semiconductor reference platforms.
Applicable scenarios: metrology room benchmark, 000 level, 00 level high-precision detection platform, high-end equipment base, etc.
2. Indian Black Granite [high-end alternative, can be used at level 000/00]
The performance is close to Jinan Qing, with high density and low coefficient of thermal expansion; Imported raw materials, large-sized raw materials are easier to obtain than Jinan Qing.
Applicable: Class 000, 00 precision base, linear motor platform; The price is slightly lower than the genuine Jinan green.
3. Zhangqiu Black [Cost effective main force, up to level 00, regular level 0]
The density is about 2.8 g/cm ³, and the performance is slightly lower than that of Jinan Qing. It is generally stable at level 0 or level 00, and level 000 is not recommended.
Attention: Some materials need to be dyed, and their water absorption rate is slightly higher than that of Jinan green.
Recommended scenarios: Ordinary workshop 0-level inspection platform, medium precision equipment base.
4. Northeast material [only level 0, ordinary tooling platform]
The grain size is coarse, the density is low, and the stability is poor. It can only achieve level 0 or 1 and cannot achieve level 00/000.
Applicable: Workshop marking, fixture positioning, not suitable for precision measurement.
1. Physical parameters of Jinan Qingxin: density of 3.07~3.3 g/cm ³; Water absorption rate<0.13%; Linear expansion coefficient 4.16 × 10 ⁻⁶/℃; Mohs hardness level 6-7;
Advantages: ultrafine grain size, uniform and dense structure, low internal stress, good shock absorption and damping, minimal temperature and humidity deformation, stable up to levels 000, 00, and 0; Not dyed, permanently colorfast; Resistant to cutting fluid, non-magnetic, suitable for three coordinate, optical, and semiconductor reference platforms.
Applicable scenarios: metrology room benchmark, 000 level, 00 level high-precision detection platform, high-end equipment base, etc.
2. Indian Black Granite [high-end alternative, can be used at level 000/00]
The performance is close to Jinan Qing, with high density and low coefficient of thermal expansion; Imported raw materials, large-sized raw materials are easier to obtain than Jinan Qing.
Applicable: Class 000, 00 precision base, linear motor platform; The price is slightly lower than the genuine Jinan green.
3. Zhangqiu Black [Cost effective main force, up to level 00, regular level 0]
The density is about 2.8 g/cm ³, and the performance is slightly lower than that of Jinan Qing. It is generally stable at level 0 or level 00, and level 000 is not recommended.
Attention: Some materials need to be dyed, and their water absorption rate is slightly higher than that of Jinan green.
Recommended scenarios: Ordinary workshop 0-level inspection platform, medium precision equipment base.
4. Northeast material [only level 0, ordinary tooling platform]
The grain size is coarse, the density is low, and the stability is poor. It can only achieve level 0 or 1 and cannot achieve level 00/000.
Applicable: Workshop marking, fixture positioning, not suitable for precision measurement.
4. Is there a constant temperature and humidity workshop?
Our factory is equipped with an independent constant temperature and humidity precision workshop (precision grinding+measurement and testing area) for ordinary rough machining and rough slotting in the large factory building; The ultra precision grinding, static aging, and factory precision testing of Class 00 and Class 000 products are all completed in a constant temperature and humidity workshop.
Workshop environmental parameters:
reference temperature: 20 ℃ (international reference temperature for length measurement)
Class 00 control: 20 ℃± 1 ℃,
Class 000 ultra-high precision control: 20 ℃± 0.5 ℃, hourly temperature fluctuation<0.3 ℃;
Relative humidity: 40%~60% RH (conventional stable 45~55% RH), humidity fluctuation within ± 5% RH;
Supporting facilities: shock-absorbing independent foundation, dust-proof purification, no direct blowing, reducing precision interference caused by vibration and airflow.
Workshop environmental parameters:
reference temperature: 20 ℃ (international reference temperature for length measurement)
Class 00 control: 20 ℃± 1 ℃,
Class 000 ultra-high precision control: 20 ℃± 0.5 ℃, hourly temperature fluctuation<0.3 ℃;
Relative humidity: 40%~60% RH (conventional stable 45~55% RH), humidity fluctuation within ± 5% RH;
Supporting facilities: shock-absorbing independent foundation, dust-proof purification, no direct blowing, reducing precision interference caused by vibration and airflow.
5. Can we produce according to European/DIN/ISO standards and provide third-party testing reports?
Our factory can manufacture and test granite platforms in full accordance with European DIN 876 (German standard, the most commonly used in Europe) and ISO 8512-2 international standards. We can provide corresponding factory inspection certificates to meet customer metrological acceptance requirements.
6. Overseas cooperative clients?
Our products have been exported to many countries and regions around the world, with rich experience in overseas project delivery and familiarity with measurement and acceptance standards and international logistics solutions in different regions. Stable cooperative clients include: European countries such as Germany, Italy, Poland, etc; Australia; Mexico; Indonesia, India, Oman, Iraq, Pakistan, etc. For many years, we have provided Jinan Qing granite platforms and equipment bases that comply with DIN/ISO standards for precision machinery, coordinate measuring, optical, and semiconductor equipment enterprises in various countries. We can customize production, testing, and issue corresponding certificates according to the acceptance requirements of the customer's location.
7. Can we OEM according to the customer's drawings?
Support OEM customized processing according to the engineering drawings provided by customers. We can customize the granite platform, machine base, and CMM base according to the customer's 2D/3D drawings, including shape cutting, T-groove processing, threaded holes, countersunk holes, through holes, embedded steel sleeves, slotting, weight reduction cavities, installation reference surfaces, and all other drawing annotation features.
8. What is the minimum order quantity?
No hard requirements, support single piece customization, whether it is a single high-precision granite platform, small benchmark block, or a large batch of equipment base orders, we can undertake them. Single piece sample/small specification single piece: can accept orders, suitable for R&D, laboratory, and project prototype use; Batch orders: The larger the quantity, the better the cost per unit, and the more flexible the delivery schedule.
9. How to do packaging and transportation for exporting to different countries?
Adopting multi-layer protection and customized heavy-duty export wooden box packaging; Supports multiple modes of sea, air, and land transportation, and can be delivered on EXW/FOB/CIF/DDP terms.
10. Payment method?
Our company commonly uses two payment methods: T/T telegraphic transfer and letter of credit L/C. For regular orders, 50% advance payment (after contract signing) and 50% final payment before shipment; Small sample orders: 100% prepaid;
