{"id":2512,"date":"2026-04-25T08:50:26","date_gmt":"2026-04-25T00:50:26","guid":{"rendered":"https:\/\/jtlcnc.com\/?p=2512"},"modified":"2026-04-25T08:50:27","modified_gmt":"2026-04-25T00:50:27","slug":"correct-method-for-oiling-a-granite-base","status":"publish","type":"post","link":"https:\/\/jtlcnc.com\/fr\/2026\/04\/25\/correct-method-for-oiling-a-granite-base\/","title":{"rendered":"Correct method for oiling a granite base"},"content":{"rendered":"

The core of oiling is “thin, uniform, no omissions, no residue.” It is essential to form an effective protective film while avoiding thick application that causes sticking, residual contamination, or affecting subsequent installation and use. The specific steps and details are as follows, applicable to all recommended oils (specialized protective oil, industrial white oil, emergency sewing machine oil):<\/p>\n\n\n\n

I. Pre-treatment Before Oiling (Critical Step to Avoid Protective Failure)<\/p>\n\n\n\n

    \n
  1. Clean the Surface: Use a clean, lint-free, oil-free cotton cloth (or dust-free cloth) to gently wipe all surfaces of the granite base (including the front, back, sides, and edges). Thoroughly remove dust, debris, fingerprints, and water stains to ensure the surface is dry and clean. If there is oil contamination, wipe with a diluted neutral cleaner, dry, and let stand for 10-15 minutes to ensure complete drying before proceeding to the next step.<\/li>\n\n\n\n
  2. Inspect the Surface: Confirm the base surface is free of scratches, damage, and rust spots. If there are slight rust spots, gently sand them off with fine sandpaper and re-clean and dry the area to avoid covering impurities with oil, which would affect the density of the protective film.<\/li>\n\n\n\n
  3. Prepare Tools: Have ready a cotton cloth for oiling (it is recommended to use a dedicated cloth, not mixed with other oily tools) and the selected protective oil. If using emergency diluted sewing machine oil, stir it evenly in advance to ensure a consistent dilution ratio.<\/li>\n<\/ol>\n\n\n\n

    II. Correct Application Steps (Core Operation)<\/p>\n\n\n\n

      \n
    1. Dip the Oil: Use a corner of a clean cotton cloth to gently dip a small amount of oil. The standard is “slightly damp cloth, no dripping oil,” avoiding taking too much at once (excess is prone to thick application and residue).<\/li>\n\n\n\n
    2. Uniform Wiping: Use a “one-way wiping” method (avoid back-and-forth friction to prevent scratches). Wipe all surfaces gradually from one end of the base to the other, from the front to the sides, focusing on edges and seams (these areas are prone to moisture and friction; ensure oil film coverage without oil accumulation).<\/li>\n\n\n\n
    3. Secondary Touch-up: After wiping, inspect the base surface. If there are areas without an oil film or that feel dry, touch up once with a cloth dipped in a small amount of oil. Ensure the entire surface forms a uniform thin oil film with no omissions or thick accumulations.<\/li>\n\n\n\n
    4. Remove Excess Oil: Use a clean, dry cotton cloth to gently wipe the base surface once to remove excess oil. Avoid a sticky surface that attracts dust, ensuring the oil film is thin and dense. When touched by hand, there should be no obvious stickiness (only a slight sense of oiliness).<\/li>\n<\/ol>\n\n\n\n

      III. Drying and Packaging after Oil Application (Ensuring Transport Protection Effectiveness)<\/p>\n\n\n\n

        \n
      1. Static Drying: After oil application, pl the base in a dry, ventilated, and dust-free environment to dry statically\u2014dedicated granite protective oil requires 1-2 hours, industrial white oil require3 hours, and diluted sewing machine oil requires 3-4 hours, until the oil film is completely dry and non-tacky.<\/li>\n\n\n\n
      2. Packaging Protection: After drying, wrap the bash clean foam and bubble wrap (to prevent packaging materials from adhering to the oil film), then pack it into a carton to ensure no friction or impact during transport, while avoidiamage to the oil film.<\/li>\n<\/ol>\n\n\n\n

        IV. Key Precautions for Oil Application<\/p>\n\n\n\n

          \n
        • Strict Control of Oil Quantity: Firmly avoid thick application. Thick application is difficult to dry, leaicky residue that attracts dust, makes subsequent wiping difficult, and may affect the fit between the base and the bracket.<\/li>\n\n\n\n
        • Tool Cleaning: Cotton cloths and containers used for oil applicamust be kept clean. They must not come into contact with other oils such as diesel or engine oil to prevent contamination of the protective oil and corrosion of the granite surface.<\/li>\n\n\n\n
        • Environmental Rrements: The oil application and drying processes must be conducted away from humid, dusty, and acidic\/alkaline environments (e.g., rainy weather, workshop acid\/alkaes) to avoid oil film failure and surface contamination.<\/li>\n\n\n\n
        • Compatibility of Different Oils: Dedicated protective oil can be applied directly; industrial white oil does not require dilution and can be applitly; diluted sewing machine oil must be stirred evenly to avoid high local concentrations and residue.<\/li>\n\n\n\n
        • Post-Handling Instructions: Upon arrival, the base must be wiped with a diluted neutral cleaner tughly remove the oil film. It should be dried before installation to avoid the oil film affecting fitting accuracy.<\/li>\n<\/ul>\n\n\n\n
          \"\"<\/figure>","protected":false},"excerpt":{"rendered":"

          The core of oiling is “thin, uniform, no omissions, no residue.” It is essential to form an effective protective film while avoiding thick application that causes sticking, residual contamination, or affecting subsequent installation and use. The specific steps and details are as follows, applicable to all recommended oils (specialized protective oil, industrial white oil, emergency…<\/p>","protected":false},"author":1,"featured_media":2515,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[35],"tags":[],"class_list":["post-2512","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"taxonomy_info":{"category":[{"value":35,"label":"NEWS"}]},"featured_image_src_large":["https:\/\/jtlcnc.com\/wp-content\/uploads\/2026\/04\/\u5fae\u4fe1\u56fe\u7247_20260420154951_94_25-1024x717.png",1024,717,true],"author_info":{"display_name":"jinxing6611@gmail.com","author_link":"https:\/\/jtlcnc.com\/fr\/author\/jtlcnc\/"},"comment_info":0,"category_info":[{"term_id":35,"name":"NEWS","slug":"news","term_group":0,"term_taxonomy_id":35,"taxonomy":"category","description":"","parent":0,"count":155,"filter":"raw","cat_ID":35,"category_count":155,"category_description":"","cat_name":"NEWS","category_nicename":"news","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts\/2512","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/comments?post=2512"}],"version-history":[{"count":1,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts\/2512\/revisions"}],"predecessor-version":[{"id":2516,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts\/2512\/revisions\/2516"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/media\/2515"}],"wp:attachment":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/media?parent=2512"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/categories?post=2512"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/tags?post=2512"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}