{"id":2019,"date":"2026-03-07T08:24:32","date_gmt":"2026-03-07T00:24:32","guid":{"rendered":"https:\/\/jtlcnc.com\/?p=2019"},"modified":"2026-03-07T08:24:33","modified_gmt":"2026-03-07T00:24:33","slug":"cleaning-and-maintenance-of-granite-measuring-tools","status":"publish","type":"post","link":"https:\/\/jtlcnc.com\/fr\/2026\/03\/07\/cleaning-and-maintenance-of-granite-measuring-tools\/","title":{"rendered":"Nettoyage et entretien des outils de mesure en granit"},"content":{"rendered":"

Granite Measuring Platform \/ Gauge Cleaning Maintenance Daily Care Standards
Applicable tde 00, Grade 0 granite platforms, straight edges, angle blocks, parallels, etc.<\/p>\n\n\n\n

I. Cleaning Methods (Core: No scratching, no corrosion, no deformation)<\/p>\n\n\n\n

    \n
  1. Dailaning (After each use)
    Wipe gently with a clean, soft, lint-free cloth \/ chamois
    First sweep away dust with a soft brush, then wipe
    For il stains:
    Wipe gently with anhydrous ethanol \/ industrial alcohol
    Or use a stone-specific cleaner
    Strictly Prohibited:
    Steel wool, blades, sandpaper
    Strong a, strong alkalis, laundry detergent, dish soap
    Direct rinsing with water, prolonged soaking<\/li>\n\n\n\n
  2. Deep Cleaning (Monthly \/ Quarterly)
    Wipe the surface clean with alcohheck for oil films, fingerprints, and cutting fluid residue
    After drying, apply a thin, even layer of rust preventive oil \/ instrument oil
    \u2192 Purpose: Prevent hand sweat, me, and minor rusting (metal parts)<\/li>\n<\/ol>\n\n\n\n

    II. Maintenance Key Points (Determines lifespan and accuracy)<\/p>\n\n\n\n

      \n
    1. Usage Environment Requirements
      Temperature: 20\u00b12\u00b0C isdeal
      Avoid:
      Direct sunlight
      Direct air conditioning \/ fan blowing
      Near heat sources (machine tools, radiators, welders)
      Severe floor vibrations
      Principle: Uniform temperature > Absol temperature<\/li>\n\n\n\n
    2. Placement & Support (Most critical!)
      Must be supported at three points
      Strictly Prohibited:
      Four-point hard pressing
      Forced clamping, lockingbolts tight
      Padding with wood, foam, or uneven objects
      Regularly check supports for looseness or sinking<\/li>\n\n\n\n
    3. Usage Standards
      Handle workpieces gently; do norop, hit, or drag
      Do not drag rough surfaces or castings directly on the platform
      Do not perform heavy work such as hammering, chiseling, welding, or grinding
      Do not pile excess workpieces, tools, or debris<\/li>\n\n\n\n
    4. Rust & Stain Prevention
      Hand sweat is corrosive; wear gloves as much as possible
      If unused for a time:
      Clean thoroughly
      Apply a thin layer of instrument oil \/ rust preventive oil
      Cover with a dust cover (cotton cloth \/ dedicated cover)
      Strictly Prohibited:
      Leautting fluid, machine oil, or water on the surface for a long time
      Covering directly with paper or wood (may cause discoloration or moisture)<\/li>\n\n\n\n
    5. Regular Calibration platforms: Calibrate flatness every 6\u201312 months
      Must re-level and re-inspect after bumps or movement
      If cracks, chipped corners, or severe scrahes appear \u2192 Stop use immediately and send for repair<\/li>\n<\/ol>\n\n\n\n

      III. Methods for Different Stains
      Dust
      Soft brush \u2192 Wipe with cloth \u2192 Wipe with alcohol
      Frprints, oil films
      Alcohol \/ White spirit \u2192 Wipe dry with clean cloth
      Machine oil, cutting fluid
      Specialized degreaser \u2192 Wipe multiple times \u2192 Dry
      Minr scratches
      Ultra-fine diamond polishing paste gentle hand lapping (operated by professionals)
      Rust spots (metal parts)
      Rust remover \u2192 Wipe clean \u2192 Apply rust prentive oil<\/p>\n\n\n\n

      IV. Taboos (Must remember)
      \u274c Do not rinse with water or soak
      \u274c Do not use steel wool or hard brushes
      \u274c Do not use strong acids or alkalis
      \u274c Do not apply heavy pressure, impact, or forceful fixing
      \u274c Do not place in sunlight, drafts, or near heat sources
      \u274c Do not leave uncovered or unattended for a long time
      \u274c Do not arbitrarily change support points<\/p>\n\n\n\n

      V. Minimalist Maintenance Slogan
      Handle gently and clean often, three-point support, no hard ling
      Maintain constant temperature, avoid dust and vibrations, apply oil and cover for long storage<\/p>\n\n\n\n

      \"\"<\/figure>","protected":false},"excerpt":{"rendered":"

      Granite Measuring Platform \/ Gauge Cleaning Maintenance Daily Care StandardsApplicable tde 00, Grade 0 granite platforms, straight edges, angle blocks, parallels, etc. I. Cleaning Methods (Core: No scratching, no corrosion, no deformation) II. Maintenance Key Points (Determines lifespan and accuracy) III. Methods for Different StainsDustSoft brush \u2192 Wipe with cloth \u2192 Wipe with alcoholFrprints, oil…<\/p>","protected":false},"author":1,"featured_media":2023,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[35],"tags":[],"class_list":["post-2019","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"taxonomy_info":{"category":[{"value":35,"label":"NEWS"}]},"featured_image_src_large":["https:\/\/jtlcnc.com\/wp-content\/uploads\/2026\/03\/\u5fae\u4fe1\u56fe\u7247_20260305105711_11_11-1024x523.jpg",1024,523,true],"author_info":{"display_name":"jinxing6611@gmail.com","author_link":"https:\/\/jtlcnc.com\/fr\/author\/jtlcnc\/"},"comment_info":0,"category_info":[{"term_id":35,"name":"NEWS","slug":"news","term_group":0,"term_taxonomy_id":35,"taxonomy":"category","description":"","parent":0,"count":121,"filter":"raw","cat_ID":35,"category_count":121,"category_description":"","cat_name":"NEWS","category_nicename":"news","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts\/2019","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/comments?post=2019"}],"version-history":[{"count":1,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts\/2019\/revisions"}],"predecessor-version":[{"id":2022,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/posts\/2019\/revisions\/2022"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/media\/2023"}],"wp:attachment":[{"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/media?parent=2019"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/categories?post=2019"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jtlcnc.com\/fr\/wp-json\/wp\/v2\/tags?post=2019"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}