{"id":2281,"date":"2026-04-03T08:21:22","date_gmt":"2026-04-03T00:21:22","guid":{"rendered":"https:\/\/jtlcnc.com\/?p=2281"},"modified":"2026-04-03T08:21:23","modified_gmt":"2026-04-03T00:21:23","slug":"daily-maintenance-tips-for-granite-parallels","status":"publish","type":"post","link":"https:\/\/jtlcnc.com\/es\/2026\/04\/03\/daily-maintenance-tips-for-granite-parallels\/","title":{"rendered":"Consejos para el mantenimiento diario de los paralelos de granito"},"content":{"rendered":"

Granite Parallel Rule (also known as Marble Parallel Rule) is a high-precision precision measuriol. The core of maintenance lies in preventing impact, corrosion, and temperature\/humidity fluctuations, as well as frequent cleaning and regular calibration. The following are systematic daily maintenance tips:<\/p>\n\n\n\n

I.ge Standards (Prevent Damage)
Handle with care; strictly prohibit impact.
Granite is brittle; absolutely forbidden to drop, strike, apply heavy pressure, or collide with metal workeces\/tools.
When handling, support the main body with both hands; do not lift by one side to avoid breakage.
When measuring, ensure the workpiece is completely stationary to premic friction from scratching the working surface.
Standard operation; avoid overloading.
Use only as a measurement reference; do not use as a pad or fixture.
Do not exceed rated loadribute heavy objects evenly; prohibit localized concentrated pressure.
Wear gloves to avoid direct contact.
Wear lint-free cotton gloves during operation to prevent sweat, oil, and fingerprints from corrodiion surfaces.<\/p>\n\n\n\n

II. Daily Cleaning (Maintain Precision)
Daily Cleaning Procedure
First, use a soft-bristled brush or lint-free cloth to sweep away dust and metaavings.
Then, dampen a soft cloth with neutral cleaner or dedicated granite cleaner and wipe gently.
Finally, wipe thoroughly dry with a clean dry cloth to leave no water marks.
Stareatment Prohibitions
\u2705 Allowed: Neutral cleaner, industrial alcohol, dedicated stone care solution.
\u274c Strictly Prohibited: Vinegar, lemon juice, strong alkali, g acid, hard-bristled brushes, sandpaper (will corrode and scratch the surface).
Oil Stains: Clean immediately with neutral cleaner; for stubborn stains, use a dedicated stain rver paste to polish gently.<\/p>\n\n\n\n

III. Environment & Storage (Stabilize Dimensions)
Temperature and Humidity Control
Ideal: Temperature 20\u00b15\u00b0C, umidity 40%\u201360%.
Avoid: Direct sunlight, direct air conditioning airflow, proximity to heat\/cold sources, sudden temperature changes.
Long-term Storage: Place horizontally on a wox or rubber pad; do not allow direct contact with metal or concrete floors.
Dust and Moisture Prevention
Immediately cover with a dedicated dust cover when not in use (prevenust wear and moisture erosion).
Use desiccant when humidity >70%; check regularly for mold spots.<\/p>\n\n\n\n

IV. Regular Maintenance (Extend Lifespan)
Surface Protection (Evy 6 months)
After cleaning and drying, apply granite-specific sealer evenly to form a stain-resistant barrier.
Apply a thin coat of rust-proof oil to metal accessories (pins, boltsnt corrosion.
Precision Calibration (Critical)
High-frequency use: Every 3 months; General use: Every 6\u201312 months.
Send to a professional metrology institution forlibration of parallelism and flatness using a laser interferometer.
Stop using immediately if out of tolerance and send for repair; do not use while faulty.
Minor Damage Repair
Shallw scratches: Polish gently with W2.5\u2013W5 diamond grinding paste.
Small pits\/chips: Non-working surfaces can be repaired with epoxy resin; damage to working surfaces be sent for professional refurbishment immediately.<\/p>\n\n\n\n

V. Prohibition List (Must Remember)
\u274c Do not blow directly with compressed air (dust will embed into pores).
\u274c Do not scrapeking surface with metal tools.
\u274c Do not store with files, wrenches, drill bits, etc.
\u274c Do not measure without cleaning.
\u274c Do not store vertically for aong time (prone to deformation and breakage).<\/p>\n\n\n\n

Summary: Granite Parallel Rule Maintenance Slogan \u2014 Handle with care, wear gloves, neutral cleaning, constant temperature and humidity, keep covered, regularcalibration. Strict execution can maintain precision for a long time and extend service life.<\/p>\n\n\n\n

\"\"<\/figure>","protected":false},"excerpt":{"rendered":"

La regla paralela de granito (tambi\u00e9n conocida como regla paralela de m\u00e1rmol) es un medidor de precisi\u00f3n de alta precisi\u00f3n. El n\u00facleo del mantenimiento reside en la prevenci\u00f3n de golpes, corrosi\u00f3n y fluctuaciones de temperatura\/humedad, as\u00ed como en la limpieza frecuente y la calibraci\u00f3n peri\u00f3dica. A continuaci\u00f3n se ofrecen consejos sistem\u00e1ticos de mantenimiento diario: I.ge Normas (Prevenir da\u00f1os)Manipular con cuidado; prohibir terminantemente los impactos.El granito es quebradizo; absolutamente prohibido...<\/p>","protected":false},"author":1,"featured_media":1280,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"","_seopress_titles_desc":"","_seopress_robots_index":"","_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[35],"tags":[],"class_list":["post-2281","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news"],"taxonomy_info":{"category":[{"value":35,"label":"NEWS"}]},"featured_image_src_large":["https:\/\/jtlcnc.com\/wp-content\/uploads\/2026\/01\/\u5e73\u884c\u89c43-1024x768.jpg",1024,768,true],"author_info":{"display_name":"jinxing6611@gmail.com","author_link":"https:\/\/jtlcnc.com\/es\/author\/jtlcnc\/"},"comment_info":0,"category_info":[{"term_id":35,"name":"NEWS","slug":"news","term_group":0,"term_taxonomy_id":35,"taxonomy":"category","description":"","parent":0,"count":119,"filter":"raw","cat_ID":35,"category_count":119,"category_description":"","cat_name":"NEWS","category_nicename":"news","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/posts\/2281","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/comments?post=2281"}],"version-history":[{"count":1,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/posts\/2281\/revisions"}],"predecessor-version":[{"id":2284,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/posts\/2281\/revisions\/2284"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/media\/1280"}],"wp:attachment":[{"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/media?parent=2281"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/categories?post=2281"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jtlcnc.com\/es\/wp-json\/wp\/v2\/tags?post=2281"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}